 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| (R) STPR1020CB/CG/CT/CF/CFP/CR ULTRA-FAST RECOVERY RECTIFIER DIODES MAIN PRODUCTS CHARACTERISTICS IF(AV) VRRM Tj (max) VF (max) trr (max) FEATURES s A1 K 2x5A 200 V 150C 0.99 V 30 ns A1 K A2 A2 A2 K A1 TO-220AB STPR1020CT TO-220FPAB STPR1020CFP K s s s s SUITED FOR SMPS LOW LOSSES LOW FORWARD AND REVERSE RECOVERY TIME HIGH SURGE CURRENT CAPABILITY INSULATED PACKAGES: ISOWATT220AB / TO-220FPAB Insulation Voltage = 2000V DC Capacitance = 12 pF K A2 A1 K A2 A1 ISOWATT220AB STPR1020CF K DPAK STPR1020CB DESCRIPTION Dual center tap rectifier suited for Switched Mode Power Supplies and high frequency DC to DC converters. Packaged in DPAK, D2PAK, I2PAK, TO-220AB, TO-220FPAB or ISOWATT220AB, this device is intended for use in low voltage, high frequency inverters, free wheeling and polarity protection applications. ABSOLUTE MAXIMUM (limiting values, per diode) Symbol VRRM IF(RMS) RMS forward current 2 A2 A1 K A1 A2 D2PAK STPR1020CG I2PAK STPR1020CR Parameter Repetitive peak reverse voltage D PAK / TO-220AB / ISOWATT220AB / TO-220FPAB / I2PAK DPAK 2 Value 200 10 7 Tc=125C Tc=115C Tc=110C Per diode Per device Per device 5 10 10 50 - 65 to + 150 Unit V A A A IF(AV) Average forward D PAK / DPAK current TO-220AB / I2PAK = 0.5 ISOWATT220AB TO-220FPAB IFSM Tstg Surge non repetitive forward current Storage temperature range tp=10ms sinusoidal A C 1/10 August 2002- Ed: 2E STPR1020CB/CG/CT/CF/CFP/CR THERMAL RESISTANCES Symbol Rth (j-c) Junction to case Parameter TO-220AB / D PAK / DPAK I2PAK ISOWATT220AB 2 Value Per diode Total Per diode Total 4.0 2.4 6.0 4.0 6.5 5 0.7 2.0 3.5 Unit C/W TO-220FPAB Per diode Total Rth (c) Coupling TO-220AB / D2PAK / DPAK / I2PAK ISOWATT220AB TO-220FPAB When diodes 1 and 2 are used simultaneously : Tj(diode 1) = P(diode 1) x Rth(j-c) (Per diode) + P(diode 2) x Rth(c) STATIC ELECTRICAL CHARACTERISTICS (per diode) Symbol IR * VF ** Parameters Reverse leakage current Forward voltage drop Test conditions Tj = 25C VR = VRRM Tj = 100C Tj = 125C Tj = 125C Tj = 25C Pulse test : * tp = 5 ms, < 2 % ** tp = 380 s, < 2 % Min. Typ. Max. 50 0.6 0.99 1.20 1.25 Unit A mA V IF = 5 A IF = 10 A IF = 10 A 0.8 0.95 To evaluate the conduction losses use the following equation : P = 0.78 x IF(AV) + 0.042 x IF2(RMS) RECOVERY CHARACTERISTICS Symbol trr tfr VFP Test conditions IF = 0.5A IR = 1A IF = 1A VFR = 1.1 x VF max IF = 1A Min. Irr = 0.25A dIF/dt = 50 A/s dIF/dt = 50 A/s 20 3 Typ. Max. 30 Unit ns ns V Tj = 25C Tj = 25C Tj = 25C 2/10 STPR1020CB/CG/CT/CF/CFP/CR Fig. 1: Average forward power dissipation versus average forward current (per diode). Fig. 2: Peak current versus form factor (per diode). PF(av)(W) 7 6 5 4 3 2 1 T IM(A) = 0.1 = 0.05 = 0.2 = 0.5 =1 IF(av) (A) tp =tp/T 0 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 50 45 40 35 30 25 20 15 10 5 0 0.0 T P=5W =tp/T tp P=7.5W P=10W P=2.5W 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 Fig. 3-1: Average forward current versus ambient temperature ( = 0.5, TO-220AB, DPAK, D2PAK). Fig. 3-2: Average forward current versus ambient temperature ( = 0.5, ISOWATT220AB, TO-220FPAB). IF(av)(A) IF(av)(A) 6 Rth(j-a)=Rth(j-c) 6 5 4 3 2 1 0 =tp/T tp T Rth(j-a)=15C/W Rth(j-a)=Rth(j-c) 5 ISOWATT220AB TO-220FP 4 3 2 Tamb(C) T Rth(j-a)=15C/W 1 100 125 150 0 25 50 75 0 =tp/T tp Tamb(C) 50 75 100 125 150 0 25 Fig. 4-1: Non repetitive surge peak forward current versus overload duration (TO-220AB, DPAK, D2PAK). Fig. 4-2: Non repetitive surge peak forward current versus overload duration (ISOWATT220AB). IM(A) 70 60 50 40 Tc=25C IM(A) 60 50 40 30 20 Tc=25C 30 20 IM Tc=125C t IM 10 0 1E-3 =0.5 t(s) 1E-2 1E-1 1E+0 10 0 1E-3 Tc=100C t =0.5 t(s) 1E-2 1E-1 1E+0 3/10 STPR1020CB/CG/CT/CF/CFP/CR Fig. 4-3: Non repetitive surge peak forward current versus overload duration (TO-220FPAB). Fig. 5-1: Relative variation of thermal impedance junction to case versus pulse duration (D2PAK, DPAK, TO-220AB). IM(A) 50 40 30 20 Tc=25C K=[Zth(j-c)/Rth(j-c)] 1.0 = 0.5 = 0.2 = 0.1 T 10 IM t Tc=100C =0.5 Single pulse t(s) 1E-2 1E-1 1E+0 0.1 1E-3 1E-2 t(s) 1E-1 0 1E-3 =tp/T tp 1E+0 Fig. 5-2: Relative variation of thermal impedance junction to case versus pulse duration (ISOWATT220AB, TO-220FPAB). Fig. 6: Forward voltage drop versus forward current (maximum values, per diode). K=[Zth(j-c)/Rth(j-c)] 1.0 = 0.5 IFM(A) 50.0 10.0 Tj=125C Tj=25C = 0.2 = 0.1 1.0 Single pulse T t(s) 0.1 1E-2 1E-1 1E+0 =tp/T tp VFM(V) 0.1 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 1E+1 Fig. 7: Junction capacitance versus reverse voltage applied (typical values, per diode). C(pF) 50 40 30 F=1MHz Tj=25C Fig. 8: Reverse recovery charges versus dIF/dt (per diode). Qrr(nC) 200 IF=IF(av) 90% confidence Tj=125C 100 50 20 20 VR(V) 10 1 10 100 200 10 10 20 dIF/dt(A/s) 50 100 200 500 4/10 STPR1020CB/CG/CT/CF/CFP/CR Fig. 9: Peak reverse recovery current versus dIF/dt (per diode). Fig. 10: Dynamic parameters versus junction temperature (per diode). IRM(A) 20.0 10.0 IF=IF(av) 90% confidence Tj=125C Qrr;IRM [Tj] / Qrr;IRM [Tj=125C] 1.25 1.00 0.75 0.50 dIF/dt(A/s) IRM 1.0 Qrr Tj(C) 200 500 0.1 10 20 50 100 0.25 0 25 50 75 100 125 150 Fig. 11: Thermal resistance junction to ambient versus copper surface under tab (Epoxy printed circuit board FR4, copper thickness: 35m). Rth(j-a) (C/W) 100 90 80 70 60 50 40 30 20 10 0 DPAK DPAK S(Cu) (cm) 0 5 10 15 20 25 30 35 40 5/10 STPR1020CB/CG/CT/CF/CFP/CR PACKAGE MECHANICAL DATA DPAK DIMENSIONS Millimeters Inches Min. Max Min. Max. 2.20 2.40 0.086 0.094 0.90 1.10 0.035 0.043 0.03 0.23 0.001 0.009 0.64 0.90 0.025 0.035 5.20 5.40 0.204 0.212 0.45 0.60 0.017 0.023 0.48 0.60 0.018 0.023 6.00 6.20 0.236 0.244 6.40 6.60 0.251 0.259 4.40 4.60 0.173 0.181 9.35 10.10 0.368 0.397 0.80 typ. 0.031 typ. 0.60 1.00 0.023 0.039 0 8 0 8 REF. A A1 A2 B B2 C C2 D E G H L2 L4 V2 FOOT PRINT (in milliteters) DPAK 6.7 6.7 3 3 1.6 2.3 2.3 1.6 6/10 STPR1020CB/CG/CT/CF/CFP/CR PACKAGE MECHANICAL DATA D2PAK DIMENSIONS Millimeters Inches Min. Max. Min. Max. 4.40 4.60 0.173 0.181 2.49 2.69 0.098 0.106 0.03 0.23 0.001 0.009 0.70 0.93 0.027 0.037 1.14 1.70 0.045 0.067 0.45 0.60 0.017 0.024 1.23 1.36 0.048 0.054 8.95 9.35 0.352 0.368 10.00 10.40 0.393 0.409 4.88 5.28 0.192 0.208 15.00 15.85 0.590 0.624 1.27 1.40 0.050 0.055 1.40 1.75 0.055 0.069 2.40 3.20 0.094 0.126 0.40 typ. 0.016 typ. 0 8 0 8 REF. A E L2 C2 D L L3 A1 B2 B G A2 C R M * V2 A A1 A2 B B2 C C2 D E G L L2 L3 M R V2 * FLAT ZONE NO LESS THAN 2mm FOOT PRINT (in milliteters) D2PAK 16.90 10.30 1.30 5.08 3.70 8.90 7/10 STPR1020CB/CG/CT/CF/CFP/CR PACKAGE MECHANICAL DATA I2PAK DIMENSIONS REF. A E L2 c2 Millimeters Min. Max. 4.60 2.69 0.93 1.17 1.17 0.60 1.36 9.35 2.70 10.4 13.6 3.78 1.40 4.40 2.49 0.70 1.14 1.14 0.45 1.23 8.95 2.40 10.0 13.1 3.48 1.27 Inches Min. 0.173 0.098 0.028 0.044 0.044 0.018 0.048 0.352 0.094 0.394 0.516 0.137 0.050 Max. 0.181 0.106 0.037 0.046 0.046 0.024 0.054 0.368 0.106 0.409 0.535 0.149 0.055 A A1 b b1 b2 c c2 D L1 b2 L b1 b e A1 D e E L c L1 L2 PACKAGE MECHANICAL DATA TO-220AB (JEDEC compatible) DIMENSIONS Millimeters Inches Min. Max. Min. Max. 4.30 4.60 0.169 0.181 1.22 1.32 0.048 0.052 2.40 2.72 0.094 0.107 0.33 0.70 0.013 0.028 0.61 0.93 0.024 0.037 1.14 1.70 0.045 0.067 1.14 1.70 0.045 0.067 4.95 5.15 0.195 0.202 2.40 2.70 0.094 0.106 10.00 10.40 0.394 0.409 16.00 Typ. 0.630 Typ. 13.00 14.00 0.512 0.551 2.65 2.95 0.104 0.116 14.80 15.75 0.583 0.620 6.20 6.60 0.244 0.260 3.40 3.94 0.134 0.155 2.60 Typ. 0.102 Typ. 3.75 3.89 0.148 0.153 H2 A REF. A C D E F F1 F2 G G1 H2 L2 L4 L5 L6 L7 L9 M Dia. C L5 L7 Dia OPTIONAL L6 L2 L9 D F2 F1(x2) L4 M F E G1 G 8/10 STPR1020CB/CG/CT/CF/CFP/CR PACKAGE MECHANICAL DATA TO-220FPAB DIMENSIONS REF. A H B Millimeters Min. Max. 4.4 4.6 2.5 2.7 2.5 2.75 0.45 0.70 0.75 1 1.15 1.70 1.15 1.70 4.95 5.20 2.4 2.7 10 10.4 16 Typ. 28.6 30.6 9.8 10.6 2.9 3.6 15.9 16.4 9.00 9.30 3.00 3.20 Inches Min. Max. 0.173 0.181 0.098 0.106 0.098 0.108 0.018 0.027 0.030 0.039 0.045 0.067 0.045 0.067 0.195 0.205 0.094 0.106 0.393 0.409 0.63 Typ. 1.126 1.205 0.386 0.417 0.114 0.142 0.626 0.646 0.354 0.366 0.118 0.126 Dia L6 L2 L3 L5 D F1 L4 F2 L7 F G1 G E A B D E F F1 F2 G G1 H L2 L3 L4 L5 L6 L7 Dia. PACKAGE MECHANICAL DATA ISOWATT220AB (JEDEC compatible) DIMENSIONS REF. A B D E F F1 F2 G G1 H L2 L3 L4 L6 L7 Diam Millimeters Min. 4.40 2.50 2.50 0.40 0.75 1.15 1.15 4.95 2.40 10.00 28.60 9.80 15.90 9.00 3.00 Max. 4.60 2.70 2.75 0.70 1.00 1.70 1.70 5.20 2.70 10.40 30.60 10.60 16.40 9.30 3.20 Inches Min. 0.173 0.098 0.098 0.016 0.030 0.045 0.045 0.195 0.094 0.394 1.125 0.386 0.626 0.354 0.118 Max. 0.181 0.106 0.108 0.028 0.039 0.067 0.067 0.205 0.106 0.409 1.205 0.417 0.646 0.366 0.126 9/10 16.00 typ. 0.630 typ. STPR1020CB/CG/CT/CF/CFP/CR Delivery mode Tube Tape & reel Tube Tube Tube Tube Tube Ordering type Marking Package Weight Base qty 75 2500 50 50 50 50 50 s s s s s s STPR1020CB STPR1020CB DPAK 0.3g STPR1020CB-TR STPR1020CB DPAK 0.3g STPR1020CT STPR1020CT TO-220AB 2.23g STPR1020CF STPR1020CF ISOWATT220AB 2.2g STPR1020CG STPR1020CG D2PAK 1.48g STPR1020CFP STPR1020CFP TO-220FP 2.0g 1.49 g STPR1020CR STPR1020CR I2PAK Cooling method : by conduction (C) Recommended torque value (ISOWATT220AB, TO-220FPAB): 0.55 N.m. Maximum torque value (ISOWATT220AB, TO-220FPAB): 0.70 N.m. Recommended torque value (TO-220AB): 0.8 N.m Maximum torque value (TO-220AB): 1.0 N.m. Epoxy meets UL94,V0 Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. The ST logo is a registered trademark of STMicroelectronics (c) 2002 STMicroelectronics - Printed in Italy - All rights reserved. STMicroelectronics GROUP OF COMPANIES Australia - Brazil - Canada - China - Finland - France - Germany Hong Kong - India - Israel - Italy - Japan - Malaysia - Malta - Morocco - Singapore Spain - Sweden - Switzerland - United Kingdom - United States. http://www.st.com 10/10 |
Price & Availability of STPR1020CT
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |